Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 81)

Digital Video Recorder

Once you have given the video clip a file name, highlight the Start button and press the

button. The confirmation

screen displaying data size will appear. When the storage device does not have enough space, the DVR will ask if you

want to copy as much of the video clip as possible in the available space. Highlight the Continue button and press

the

button to continue clip copy.

Once the clip copy starts, you can cancel it by selecting Cancel or hide the screen by selecting Close. When selecting

Close, Clip Copy continues and a confirmation screen will display when complete.

NOTE: Only 4.7GB DVD media is available. To clip copy video on DVD media using remaining space, the size

of previously recorded data on the DVD media should be less than 4GB.

Select the Full Erase option when erasing recorded data on DVD media, otherwise the media will not

operate properly when rewritten.

The file size for clip copy is limited to 30GB. When copying video clips larger than 2GB, the video clips

will be save in units of 2GB. For example, 3 individual 2GB files will be created when saving a 6GB video

clip. However, the file size for the One-Touch Clip Copy is limited to 2GB.

You can use other functions on the DVR while video is being backed up. To do this, highlight the Close button and

press the

button. You can return to the Clip-Copy screen at any time to check the progress.

You do not need to install any special software on your personal computer to review the video clips. Refer to RAS

manual for instructions on how to review video clips you have copied.

NOTE: During Clip Copy, you cannot shut the system down, clear data on the storage device, or format the

storage device.

CAUTION: Do NOT disconnect the USB cable or the power from the external drive while copying

video clips. If the external drive is shut down or the USB cable is disconnected while

copying video clips, THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL

DRIVE COULD BE DAMAGED, and you will get an error message the next time you try

to copy video clips. You will need to power down the DVR and restart it to get rid of the

error message. Once the file system of the USB hard disk drive has been corrupted, this

error message cannot be dismissed. Even after restarting the DVR it may automatically

restart while preparing to clip copy. You must recover the file system using the recovery

program, or you must reformat the hard disk drive.

You can print images on a printer. Connect a PostScript™ printer, or external hard disk drive or flash drive to one of

the USB ports.

Figure 54: Print screen.

Highlight the box beside Printer Model and press the button. Selecting

PostScript Printer will print images on a PostScript™ printer connected to

the DVR. Selecting File Printer will save the current image as a PDF file on

an external USB hard disk drive or flash drive.

NOTE: Images saved as PDF files can be printed on any printer connected

to your PC.

Highlight the box beside Paper Size and press the button. You can select

the paper size.

Once you have selected the printer model and paper size, highlight the Print button and press the

button. A message

appears asking you if you want to print the current image. Highlight the Continue button and press the

button to print.

NOTE: If your printer only supports an LPT connection (parallel), use an LPT to USB converter cable. The printer

cable is not provided.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 97 98

Comentarios a estos manuales

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 81

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder