Maxtor HVR-04E Manual de usuario

00P3DG600DGSEA3 Premium H.264 DVR User’s Manual Version 1.3

DVR User’s Manual 9 Connecting Short-term Device If any short-term devices shall be installed to the DVR as parts of the unit system, such as USB Thum

DVR User’s Manual 10 Alarm I/O & RS485 The unit provides alarm I/O and RS-485 ports that offer users the flexibility required to connect the unit

DVR User’s Manual 11 3. General System Setup Before operating the DVR, some general configuration should be setup first. The following subsections

DVR User’s Manual 12 Alarm LED The LED lights up when an alarm is triggered. HDD LED The LED lights up while the HDD is processing data to or from

DVR User’s Manual 13 MODE Press repeatedly to select desired main monitor display format. There are four available view modes: full screen, 4-window (

DVR User’s Manual 14 ENTER / ZOOM • In OSD setup menu or selection interface, press this key to make the selection or save settings. • In live full

DVR User’s Manual 15 3.2 Enter OSD Setup Menu The configuration of the DVR can be customized through the intuitive Graphical User Interface (GUI) O

DVR User’s Manual 16 3.2.1 User Management The DVR provides the option to create up to seven sets of usernames and passwords with customized authori

DVR User’s Manual 17 3.3 Power On / Shutdown the Unit If the DVR must be shutdown for any reason, please use the proper shutdown and power on proce

DVR User’s Manual 18 3.4 System Date / Time Setting Users can set the current date, time and other OSD parameters in Date/Time menu (under System S

DVR User’s Manual 1

DVR User’s Manual 19 Date Display Mode This function allows user to set the OSD display type of the date. There are three options to select from: <

DVR User’s Manual 20 3.4.3 Network Time Protocol Setup Time Zone Select <Time Zone> to enter the time zone. To find out the correct local time

DVR User’s Manual 21 3.5 IP Camera Setting The distinctive hybrid solution of the DVR enables users to connect IP camera(s) while others are analog

DVR User’s Manual 22 Model Access this item to select the model of the connected IP camera. 3.5.2 Connection Setup Enter <Connection Setup> t

DVR User’s Manual 23 NOTE: Please contact manufacturer of the IP camera for assistance if the IP camera’s Management Port / Streaming Port / Streaming

DVR User’s Manual 24 3.6 Record Schedule / Quality Setting The Record Setup menu allows users to set recording quality, recording schedules, and ot

DVR User’s Manual 25 3.6.2 Preset Record Configuration The <Preset Config> is used to select the preset recording quality and frame rate. In

DVR User’s Manual 26 3.6.4 Record Event Video Only If the DVR shall start recording only when alarms are triggered, follow the steps below: • Ente

DVR User’s Manual 27 • Select <Average Normal PPS> and press ENTER, then press UP/DOWN to make a choice. The <How Many Days To Record> wi

DVR User’s Manual 28 3.6.8 Circular Recording Users can choose to record video in circular mode or in linear mode. If circular mode is selected, the

DVR User’s Manual 2 Caution and Preventive Tips • Switch the 115/230V selector to your local voltage standard • Handle with care, do not drop the un

DVR User’s Manual 29 Purge Event Before The item is used to delete event video before a specific date. Use LEFT / RIGHT keys to move the cursor to nex

DVR User’s Manual 30 3.7.3 Exception POS Setup This sub-menu is used to define the conditions that are to be treated as an “Exception” and thus trigg

DVR User’s Manual 31 <Inside The Range>: When the value of a transaction is within a certain range, it will be marked as an exception. The range

DVR User’s Manual 32 Text Filter This item is used to choose the text filter. The supported models for pole display and printer are listed as below. P

DVR User’s Manual 33 4. Basic Operation The DVR allows user to access some general operations through the front panel easily. The following sections i

DVR User’s Manual 34 4.1.2 Digital Zoom Users are able to view a 2× full screen in live mode. To view the 2× full screen, follow the steps. • Press

DVR User’s Manual 35 Key Usage in Playback The key usage is slightly different in playback mode. Following is the key usage found in playback mode. z

DVR User’s Manual 36 4.2 Sequence Setup This section introduces the way to view sequence mode with both Main Monitor and Call Monitor, if connected.

DVR User’s Manual 37 4.3 Search Recorded Video The DVR is capable of searching and playing back recorded video by date / time, events, or text. To

DVR User’s Manual 38 NOTE: If there is no available recorded video that matches the specified time and date, the unit starts to playback from the next

DVR User’s Manual 3 Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual

DVR User’s Manual 39 4.3.3 Smart Search Smart Search allows users to search for recorded videos according to specific date/time, channel, and monitori

DVR User’s Manual 40 4.3.4 Search by Event “Event List” allows users to search wanted video by event. The Event List is displayed as below: Event Lis

DVR User’s Manual 41 4.3.5 Search by Text When a POS device is connected to the DVR, users can search for videos with text data. The “Text Query Page”

DVR User’s Manual 42 4.4 Video Export The following sections will show how to export video through the OSD setup menu and through the hot keys posit

DVR User’s Manual 43 The DVR only supports EXT3 file system. If an external HDD will be connected to the unit, ensure the format of HDD is EXT3. Devi

DVR User’s Manual 44 The *.drv file can only be played back with the remote software and playback software, and multiple camera video can be played fr

DVR User’s Manual 45 4.4.2.1 ezBurn Introduction Built with the ezBurn technology, ezBurn function provides users the easier way to export desired v

DVR User’s Manual 46 • Press ENTER to start the export; or, press ESC to abort. • If there is no exportable device connected to the DVR, then a warni

DVR User’s Manual 47 4.5 Dome Control The DVR allows user to control a dome camera by the front panel. In Live mode, user can press CHANNEL key to

DVR User’s Manual 48 To configure dome protocol, select a camera first and set the communications protocol associated with dome camera using the Direc

DVR User’s Manual 4 Table of Contents 1. Overview ...

DVR User’s Manual 49 Toggle Hint Screen This function is used to avoid viewing the dome parameter information while controlling dome camera. Press thi

DVR User’s Manual 50 4.5.5 Set Preset Points The DVR allows user to set preset positions. The amount of preset points depends on the dome manufactu

DVR User’s Manual 51 4.5.6 Call Preset Points Follow the steps to call preset points. • Press a Channel key to view the corresponding camera in fu

DVR User’s Manual 52 4.6 Intercom Function Intercom function enables the DVR site to communicate with the camera site. This function will be availab

DVR User’s Manual 53 4.7 UPnP Function UPnP is the abbreviation for Universal Plug and Play, which is a relatively new technology that integrates a

DVR User’s Manual 54 4.7.2 UPnP NAT Traversal Function The UPnP NAT traversal function will help to automatically setup a router if the DVR connect

DVR User’s Manual 55 5. Remote Monitoring Software The remote monitoring software is a remote browser-based software application designed to operat

DVR User’s Manual 56 5.2 Software Installation Refer to the following description to install the remote monitoring software. 5.2.1 Change Internet S

DVR User’s Manual 57 • Uncheck “Require server verification (https:) for all sites in this zone”. Type the IP address of the unit in field and click

DVR User’s Manual 58 5.2.2 Install Remote Monitoring Software Start the browser to initiate the installation of the remote monitoring software on the

DVR User’s Manual 5 3.7.3 Exception POS Setup...30 3.7.4 Input Setup ..

DVR User’s Manual 59 5.2.2.1 Log in / Log off Login using the same accounts setup in the DVR. The authority is also the same as setup in the DVR.

DVR User’s Manual 60 5.2.2.2 Software Upgrades If a new version of the remote monitoring software is available on the DVR, upgrade will be prompted

DVR User’s Manual 61 5.3.1.1 Select Display Mode Choose the number of windows to be displayed on the main window. Click one of the display buttons i

DVR User’s Manual 62 Focus +/− Use to adjust the camera lens to focus on objects for a clear view. Click on <Focus +> to focus near or <Focus

DVR User’s Manual 63 5.3.3 Playback Video The remote monitoring software allows users to either view recorded video from the DVR, or from the hard d

DVR User’s Manual 64 • The other option <Download (.DRV)> in <Select> field enables users to download the video segment of selected date

DVR User’s Manual 65 5.3.4 Verify Digital Signature The digital signature aims to authenticate a video file exported from the unit. Follow the desc

DVR User’s Manual 66 5.3.7 Health Status of HDD This function verifies HDD status of the DVR. The information items shown in the chart are describe

DVR User’s Manual 67 5.3.9 Remote Monitoring Software Trouble Shooting Guide What happened if the server requests to upgrade the software every tim

DVR User’s Manual 68 Appendix A: Recommended HDDs The following is a list of recommended SATA HDDs. Brand Model Name Model Number Size Barracuda 7

DVR User’s Manual 6 5.1 Remote Monitoring System Requirements ...55 5.2 Software Installatio

DVR User’s Manual 69 Appendix B: Remote Controller A remote control is provided for the DVR. The operational function keys (on the left) and dome ca

DVR User’s Manual 70 The keys of the remote control function as the keys of the front panel of the DVR. The only difference between the remote control

DVR User’s Manual 71 Appendix C: USB Mouse Operation Users can use an USB mouse to operate the DVR. To use the USB mouse, please read through the foll

DVR User’s Manual 72 Motion Detection Area Setup When users are setting the motion detection area, an USB mouse can help to speedily complete the setu

DVR User’s Manual 73 Appendix D: Keyboard Access Sketch The following sketch shows the keys used to access and control the connected DVR.

DVR User’s Manual 74 Appendix E: Simultaneous Output Options When simultaneous output is enabled, dual main monitor function is not available. Alterna

DVR User’s Manual 75 Appendix F: Jog / Shuttle Control The jog/shuttle knob is used to provide wide latitude in playback control. Note that the jog/

DVR User’s Manual 76 Appendix G: IP Camera Installation The following is an example of the installation of a NH Series IP camera. Step 1. Enter th

DVR User’s Manual 77 Step 3. Next click on the “View parameters” tab to look for current camera image settings: Brightness=25, Sharpness=128, and Con

DVR User’s Manual 78 Step 6. Access the <Camera Setup> menu of the DVR to setup the IP camera. Select the channel that is reserved for IP camer

DVR User’s Manual 7 1. Overview The Premium H.264 DVR is an integrated digital video recorder that combines the features of a time-lapse audio / vid

DVR User’s Manual 79 Step 10. Set <Apply> to <Yes> and the device setting parameters will be applied. Step 11. Set <IP Camera> Æ &

DVR User’s Manual 8 2. System Setup The notices and introduction on system installation will be described particularly in this chapter. Please follo