
User’s Manual
24
Storage
Figure 11: System – Storage setup screen.
The information in the Type column describes the storage device.
The capacity of the storage device is displayed in the Capacity column.
The Format column displays whether the device is used for recording (Record) or not (Not Using). Not formatted
indicates the device is not formatted.
indicates when the device has temporary space set aside so that video clips
can be saved on a DVD RW.
Highlight the box in the Format column for the desired storage device and press the
button.
You will be able to format the device for recording. When selecting Not Using from Use
As and highlighting the Format button, the device will not be used for recording. You can
also set aside space to store temporary files for CD or DVD burning by selecting Partition –
CD/DVD Burn.
NOTE: The DVR does NOT support USB hard disk drives with a version lower than 2.0.
The Information column displays whether the device is being used or not. Other indicates the device has been used
for another DVR.
Highlight the box in the Information column for the desired storage device and press the
button.
You will be able to check the model name, serial number and the time information
about recorded data of the selected storage device.
If you want to erase recorded data on the selected device, highlight Clear and press
the
button. You will be asked whether or not you want to delete the data.
If you want to use a USB hard disk drive, highlight Use and press the
button
after connecting the device. Highlight Don’t Use and press the
button if you
want to stop using the device.
CAUTION: Do NOT disconnect the USB cable or the power from the device while copying video clips.
If the USB cable is disconnected while copying video clips, archived data might be lost.
Comentarios a estos manuales