Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 62
- Pagina / 98
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
User’s Manual
54
Live Monitoring Menu
Login/Logout
Selecting
(Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting
(Logout) in the Live Monitoring menu displays the Logout
screen asking you to confirm whether or not you want to log out the current user.
Monitor
Selecting
(Monitor) in the Live Monitoring menu will allow you to select the monitor from Main Monitor and Spot
Monitor. Selecting Main Monitor displays
and Spot Monitor displays . Selecting Spot Monitor displays a Spot
Monitor menu on the right edge of the screen and allows you to control a Spot Monitor. Refer to the following Spot
Monitoring section for details.
Display
Full Screen: Selecting
(Display) →
(Full Screen) and choosing the camera number button displays the
selected camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking
the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1+5, 1+7, 3x3 or 4x4).
Clicking the left mouse button on the screen again returns to the previous display mode.
PIP, 2x2, 1+5, 1+7, 3x3, 4x4: Selecting
(Display) →
, , , , or (PIP, 2x2, 1+5, 1+7, 3x3 or
4x4) displays the cameras in the selected multiview screen mode (PIP, 2x2, 1+5, 1+7, 3x3 or 4x4). Selecting each
display mode is the same as pressing the
DISPLAY button or scrolling the mouse wheel up and down when in one
of the multiview formats (i.e., 2x2, 1+5, 1+7, 3x3 or 4x4).
NOTE: In the 1+5 or 1+7 display mode, the main channel indicates the channel displayed on the large screen
which is displayed in the top-left. You can select the camera you want to display on the main channel
screen. Select a channel on the screen and click the right mouse button to display the Camera Menu.
Selecting Go To Main swaps the selected channel with the main channel. This function is supported only in
the 1+5 and 1+7 display modes and can be activated from any of channel screens except the main channel
screen.
Camera OSD, Status OSD: Selecting
(Display) → Camera OSD or Status OSD toggles Camera OSD
or Status OSD On and Off.
Previous Group, Next Group
Selecting
or (Previous Group or Next Group) in the Live Monitoring menu moves to the previous or next page.
It is the same as pressing the
GROUP button.
Freeze
Selecting
(Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select again.
It is the same as pressing the
(Play/Pause) button. Pressing any button except for the MENU, ALARM and PANIC
buttons while in the Freeze mode can also exit the Freeze mode. While in the Freeze mode, the icon displays in
bottom-left corner if Freeze is selected in the Display setup screen (OSD tab).
Alarm
Selecting
(Alarm) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer during an alarm.
It is the same as pressing the
ALARM button.
Panic
Selecting
(Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting again stops
panic recording. It is the same as pressing the
PANIC button.
- Digital Video Recorder 1
- WARNING 3
- Important Safeguards 4
- Table of Contents 5
- List of Illustrations 7
- Chapter 1 — Introduction 9
- Video Input 11
- Video Loop Through 11
- Audio In/Out 12
- Alarm Input/Output 12
- RS485 Port 13
- RS232 Port 13
- Factory Reset Switch 13
- Network Port 14
- Power Cord Connector 14
- Video Out 14
- Chapter 3 — Configuration 15
- Camera Buttons (1 to 16) 16
- HDD LED 16
- Alarm Out LED 16
- Network LED 16
- Clip Copy LED 16
- MENU/CAMEO Button 18
- Arrow Buttons 18
- PLAY/PAUSE Button 18
- USB Port 18
- ID Button on Remote Control 18
- Turning on the Power 19
- Initial Unit Setup 19
- General 20
- – Continuous Record 24
- Priority Profile) 25
- Internet Connection 26
- Date/Time 28
- User’s Manual 30
- ALARM button on a local 31
- Storage 32
- System Event 33
- Recording Setup 34
- Schedule 35
- Pre-Event 37
- Event Setup 38
- Alarm-In 39
- Video Loss 40
- Video Blind 41
- Text-In 42
- Alarm-Out 46
- Remote Control 47
- Network Setup 48
- WebGuard 53
- Callback 54
- Display Setup 58
- Main Monitor 59
- Spot Monitor 60
- Chapter 4 — Operation 61
- Live Monitoring Menu 62
- Sequence 63
- Camera Menu 63
- Active Cameo Mode 64
- Zoom Mode 64
- PTZ Mode 64
- Event Monitoring 65
- Covert Camera 66
- Spot Monitoring 66
- Status Monitoring 67
- Recording Video 68
- Recording Audio 69
- Playing Recorded Video 69
- Searching Video 70
- Search Menu 71
- Event Log Search 73
- Record Table Search 74
- Motion Search 76
- Text-In Search 77
- DISPLAY button and change 78
- Bookmarks 79
- Clip-Copy 79
- Appendix 83
- Search Example II 84
- Web Monitoring Mode 86
- Web Search Mode 87
- Time Overlap 89
- Error Code Notices 89
- System Log Notices 90
- Map of Screens 91
- Troubleshooting 92
- Specifications 92
Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder
Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder Manual de usuario
(86 paginas)
(86 paginas)
(12 paginas)
Grabadores de vídeo digital (dvr) Maxtor 4-Channel DVR (Digital Video Recorder) Guía de usuario
(67 paginas)
(67 paginas)
(22 paginas)
Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder Manual de usuario
(111 paginas)
(111 paginas)
Grabadores de vídeo digital (dvr) Maxtor 4-Channel DVR (Digital Video Recorder) Manual de usuario
(37 paginas)
(37 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.098 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales