Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 71
- Pagina / 98
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Digital Video Recorder
63
Search Menu
Search
Event Log Search: Selecting
(Search) → Event Log Search selects video from the event log. See the following
Event Log Search section for details.
Record Table Search: Selecting
(Search) → Record Table Search selects using a recording table. See
the following Record Table Search section for details.
Motion Search: Selecting
(Search) → Motion Search selects motion events. See the following Motion Search
section for details.
Text-In Search: Selecting
(Search) → Text-In Search selects text input strings. See the following Text-In
Search section for details.
Go To
Go to the First: Selecting
(Go To) → Go to the First displays the first recorded image.
Go to the Last: Selecting
(Go To) → Go to the Last displays the last recorded image.
Go to the Date/Time: Selecting
(Go To) → Go to the Date/Time displays the Go to the Date/Time screen.
Move the cursor over the date and time and press the (Play/Pause) button.
You can use the Left and Right arrow buttons to highlight the year, month, day,
hours, minutes and seconds. Use the Up and Down arrow buttons to change
to the date and time you want to search for video.
Once you have set the date and time you want, press the button. Then highlight Go and press the button. The
selected date and time will display. (If no video was recorded during the selected time, a message appears alerting you
that no image was recorded at that time.) The
button and arrow buttons can now be used to review the surrounding video.
Bookmark
Selecting
(Bookmark) in the Search menu adds the current playback point to the bookmark list. See the following
Bookmarks section for details.
Display
Full Screen: Selecting
(Display) →
(Full Screen) and choosing the camera number button displays the
selected camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking
the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1+5, 1+7, 3x3 or 4x4).
Clicking the left mouse button on the screen again returns to the previous display mode.
2x2, 1+5, 1+7, 3x3, 4x4: Selecting
(Display) →
, , , or (2x2, 1+5, 1+7, 3x3 or 4x4) displays
the cameras in the selected multiview screen mode (2x2, 1+5, 1+7, 3x3 or 4x4). Selecting each display mode is
the same as pressing the
DISPLAY button or scrolling the mouse wheel up and down when in one of the multiview
formats (i.e., 2x2, 1+5, 1+7, 3x3 or 4x4).
Camera OSD, Status OSD: Selecting
(Display) → Camera OSD or Status OSD toggles Camera OSD
or Status OSD On and Off.
Previous Group, Next Group
Selecting
or (Previous Group or Next Group) in the Search menu moves to the previous or next page. It is the
same as pressing the
GROUP button.
Alarm
Selecting
(Alarm) in the Search menu resets the DVR’s outputs including the internal buzzer during an alarm. It
is the same as pressing the
ALARM button.
- Digital Video Recorder 1
- WARNING 3
- Important Safeguards 4
- Table of Contents 5
- List of Illustrations 7
- Chapter 1 — Introduction 9
- Video Input 11
- Video Loop Through 11
- Audio In/Out 12
- Alarm Input/Output 12
- RS485 Port 13
- RS232 Port 13
- Factory Reset Switch 13
- Network Port 14
- Power Cord Connector 14
- Video Out 14
- Chapter 3 — Configuration 15
- Camera Buttons (1 to 16) 16
- HDD LED 16
- Alarm Out LED 16
- Network LED 16
- Clip Copy LED 16
- MENU/CAMEO Button 18
- Arrow Buttons 18
- PLAY/PAUSE Button 18
- USB Port 18
- ID Button on Remote Control 18
- Turning on the Power 19
- Initial Unit Setup 19
- General 20
- – Continuous Record 24
- Priority Profile) 25
- Internet Connection 26
- Date/Time 28
- User’s Manual 30
- ALARM button on a local 31
- Storage 32
- System Event 33
- Recording Setup 34
- Schedule 35
- Pre-Event 37
- Event Setup 38
- Alarm-In 39
- Video Loss 40
- Video Blind 41
- Text-In 42
- Alarm-Out 46
- Remote Control 47
- Network Setup 48
- WebGuard 53
- Callback 54
- Display Setup 58
- Main Monitor 59
- Spot Monitor 60
- Chapter 4 — Operation 61
- Live Monitoring Menu 62
- Sequence 63
- Camera Menu 63
- Active Cameo Mode 64
- Zoom Mode 64
- PTZ Mode 64
- Event Monitoring 65
- Covert Camera 66
- Spot Monitoring 66
- Status Monitoring 67
- Recording Video 68
- Recording Audio 69
- Playing Recorded Video 69
- Searching Video 70
- Search Menu 71
- Event Log Search 73
- Record Table Search 74
- Motion Search 76
- Text-In Search 77
- DISPLAY button and change 78
- Bookmarks 79
- Clip-Copy 79
- Appendix 83
- Search Example II 84
- Web Monitoring Mode 86
- Web Search Mode 87
- Time Overlap 89
- Error Code Notices 89
- System Log Notices 90
- Map of Screens 91
- Troubleshooting 92
- Specifications 92
Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder
Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder Manual de usuario
(86 paginas)
(86 paginas)
(12 paginas)
Grabadores de vídeo digital (dvr) Maxtor 4-Channel DVR (Digital Video Recorder) Guía de usuario
(67 paginas)
(67 paginas)
(22 paginas)
Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder Manual de usuario
(111 paginas)
(111 paginas)
Grabadores de vídeo digital (dvr) Maxtor 4-Channel DVR (Digital Video Recorder) Manual de usuario
(37 paginas)
(37 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.087 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales