Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 49)

Digital Video Recorder

NOTE: While the SSL function is enabled, the network transfer speed you selected may not be achieved.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit

(http://www.openssl.org/).

LAN

Figure 28: Network – LAN setup screen.

Highlight the box beside Type and press the

button. You can select the type of network configuration from: Manual,

DHCP and ADSL (with PPPoE). Select the desired type and press the

button.

Selecting Manual from the Type allows you to set up LAN parameters manually.

Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or decrease the number.

The factory default LAN settings are:

IP Address: 192.168.1.129

Gateway: 192.168.1.254

Subnet Mask: 255.255.255.0

NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network

administrator.

Highlight the box beside DNS Server. Press the Up and Down arrow buttons to set the IP address of the DNS server.

Highlight the Port Number Setup… box and press the button. The Port Number Setup screen appears.

NOTE: You will need to get the appropriate Port Numbers for each RAS and WebGuard related program (Admin,

Callback, Watch and Search) from your network administrator.

Change the numbers by highlighting them and using the Up and Down

arrow buttons to increase or decrease the number. The factory default

Port settings are:

Remote Admin: 8200

Remote Callback: 8201

Remote Watch: 8016

Remote Search: 10019

NOTE: The system restarts automatically after changing the port settings.

Do NOT use the same port number for two different programs, otherwise, the DVR cannot be connected

with the PC running RAS or WebGuard.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 97 98

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 49