Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 42)

User’s Manual

Text-In

Figure 21: Event – Text-In setup screen.

The DVR can be set to react to text input from devices such as ATMs (Automated Teller Machines) and POS (Point

of Sale; i.e., cash registers). This screen allows you to configure the DVR for each text-in device.

Highlight the box under the Setup heading, and press the button. Selecting the Setup heading changes all the

parameters excluding Port settings of all the text input channels.

NOTE: The system performance might be affected when a large quantity of text inputs are detected from several

channels at the same time.

Highlight the box beside Port, and press the

button. Select from None, RS232, RS485, USB-Serial (1~8) and LAN

(1~16).

NOTE: If you have set the Port as None, you will not be able to make any changes to the screen.

When using the USB to serial text-in device, do NOT remove the USB cable from the port while the system

is running.

Text-in data might be lost when the text-in buffer is filled by simultaneous text-in transactions from all

16 LAN channels.

Highlight Setup…, and press the

button. Use the ATM or POS manufacturer’s recommended settings when configuring

the RS232, RS485, USB-Serial or LAN ports.

Highlight the box beside Text-In Product, and press the

button. Select your device from the list.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 97 98

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 42