Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 52)

User’s Manual

RTSP

Figure 30: Network – RTSP setup screen.

Highlight Enable RTSP (Real-Time Streaming Protocol) and press the

button to toggle between On and Off. You

will be able to change the settings if Enable RTSP is enabled.

Highlight the box beside RTSP Port and press the button. Set the port number of the RTSP server obtained from

your system administrator.

Highlight the box beside RTP Start Port and press the button. Set the start port number of the RTP server obtained

from your system administrator.

Highlight the box beside RTP End Port and press the button. Set the end port number of the RTP server obtained

from your system administrator.

Highlight Use Mobile and press the button to toggle between On and Off. When set to on, you can access a remote

DVR using a Blackberry or other mobile devices.

NOTE: Selecting Use Mobile sets the WebGuard service to be enabled automatically regardless of your WebGuard

settings.

When using NAT (Network Address Translation) or firewall services, opening all UDP ports allows you

to access a DVR using Blackberry and Android devices.

You can access a remote DVR and monitor live video images using media players, such as VLC Player,

supporting RTSP service. Start the media player on your local PC and enter “rtsp://ID:Password@IP

address:RTSP port number/trackID=‘channel number’”, or start Internet Explorer on your Blackberry or

other mobile devices and enter “http://IP address:We/jointfilesconvert/326481/bguard port number/”.

Some media players might play video properly depending on network conditions.

RTSP service might not be supported, depending on the type of media player.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 97 98

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 52