Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 34)

User’s Manual

Highlight the Settings box beside Disk Temperature, and press the

button. Select the temperature of hard disk

drive at which you want the DVR to trigger an alert if the temperature exceeds the defined threshold. Refer to the hard

disk drive manufacturer’s documentation for the correct temperature setting.

The DVR can be set to react to system events. Highlight the Actions box beside the desired event and press the

button. System events can be associated with an Alarm-Out connector, sound the DVR’s internal buzzer, and/or notify

a number of different devices.

NOTE: Alarm-Out action cannot be set to System, Boot Up, Restart, Shutdown and Panic Record events.

Mail notify is the only option available for the System event.

Alert Window notify cannot be set to System, Boot Up, Restart and Shutdown events.

For the Notify action to work, the DVR should be registered in the RAS (Remote Administration System).

Recording Setup

General

Figure 13: Record – General setup screen.

Highlighting Recycle and pressing the

button toggles between On and Off. In the Recycle mode, the DVR records

over the oldest video data once all available storage space has been used. When Recycle is turned off, the DVR stops

recording once all available storage space has been used.

Highlight the Event Record Dwell box and set the length of time you would like to record for the associated event.

You can set the dwell from 5 seconds to 30 minutes. Refer to Event Actions screen in this chapter for information

regarding event recording.

The DVR can record up to four audio inputs. Highlighting Record Audio and pressing the button toggles between

On and Off.

Highlight the slide bar beside Auto Deletion, and use the Left and Right arrow buttons or Up and Down arrow buttons

to adjust the length of time recorded data will be kept from 1 to 999 days. The DVR automatically deletes video recorded

earlier than the user-defined period under three conditions: at midnight, whenever the system reboots or whenever the

user changes the Auto Deletion settings. Selecting Never will disable the Auto Deletion function.

Highlight the slide bar beside Limit Time-Lapse Recording, and use the Left and Right arrow buttons to adjust the

length of the maximum storage time for time-lapse recording from 1 to 99 days. The Limit Time-Lapse Recording

feature will function when the storage device has enough space to record video data longer than the preset period. When

this feature is On, the DVR records over the oldest “time-lapse” video once all available storage has been used in the

Recycle mode, so more event video can be saved. Selecting Never will disable the Limit Time-Lapse Recording function.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 97 98

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 34