Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 21)

Digital Video Recorder

Figure 8: System – General setup screen.

Highlight the Site box and press the

button. A virtual keyboard appears that you can use to enter a Site Name. Once

you have entered your title, highlight OK and press the

button.

Highlight the box beside System ID and press the button. Change the number by highlighting it and using the Up

and Down arrow buttons to increase and decrease the number from 0 to 99.

NOTE: The System ID number is used to identify the unit when it is connected with other DVRs through the RS485

port. You cannot use the same ID number for two or more DVRs that are in the same RS485 network.

It is possible to have multiple DVRs with System ID 0 that are in the same area as long as they are not

part of an RS485 network. If this is the case, all will be controlled at the same time when using the infrared

remote control.

Highlight the box beside Language and press

button. A drop-down menu displays the available languages. Highlight

the desired language and press the

button.

The box beside Version displays the software version of the DVR. To upgrade the software, connect a USB device

containing the upgrade package file to the DVR. Highlight Upgrade… and press the

button. The Upgrade screen

appears. The screen displays the upgrade package file names that are available. The “.rui” indicates that the file is for

software upgrades and “.ofi” indicates that the file is for optical drive firmware upgrades.

Select the desired file and press the button. Highlighting the Install button and pressing the button will install

the selected software package. Highlighting the Cancel button and pressing the

button will close the window without

upgrading the software. If the upgrade package file is not installed on the DVR properly, you will get an error message.

The system restarts automatically after completing the upgrade.

CAUTION: The USB device must be FAT16 or FAT32 format.

You can import saved DVR settings or export the current DVR settings. To import saved DVR settings, connect the

USB device containing the setup file (.dat) to the DVR. Highlight Setup – Import… and press the

button. Select

the desired setup file and press the Import button to import the selected settings and change the DVR settings accordingly.

Highlight Include Network Setup and press the

button to toggle between On and Off. When set to Off, the network

settings will not be changed.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 97 98

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 21