Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 48)

User’s Manual

Network Setup

General

Figure 27: Network – General setup screen.

Highlight the first box beside Remote Watch – bps/ips. You can select the Transfer Speed from 50Kbps to 1Gbps.

Highlight the second box beside Remote Watch – bps/ips. You can select the unit of measure for the transfer speed

between: bps and ips. Press the

button to set the transfer speed.

Highlight the box beside Remote Watch – Quality and press the button. You can select the Quality from: Very

High, High, Standard and Basic. Press the

button to set the Quality.

Highlight the box beside Remote Watch – Resolution and press the button. You can select the Resolution from:

High (Half D1) and Standard (CIF). Press the

button to set the Resolution.

NOTE: The higher Quality and Resolution settings require higher Transfer Speed settings. The transfer speed

you set is the maximum speed. Depending on the network environment, this speed may not be achieved.

You can limit the network bandwidth settings so that system does not consume too much network bandwidth. Highlight the

box beside Network Bandwidth Limit and press the Up and Down arrow buttons to set the desired maximum bandwidth

from 100Kbps to 1Gbps.

NOTE: When limiting the network bandwidth, the remote watch image on the PC running RAS or WebGuard

might not be displayed properly.

The DVR supports two-way audio communication between a local system and a PC running RAS. Highlighting the box

beside Remote Audio Channel and pressing the

button allows you to select the audio channel that sends audio to the

remote site. Selecting Select From RAS will send audio of the channel selected from RAS.

NOTE: Depending on network conditions, audio might be interrupted or out of synchronization during

transmission.

Highlight Enable SSL for Transferring Data and press the button to toggle between On and Off. When it is On,

the security of data except video and audio transmitted for remote monitoring or remote recording can be enhanced by

using the SSL (Secure Sockets Layer) authentication. When using the SSL function, the DVR cannot be connected with

a remote program or a network keyboard which does not support the SSL function.

CAUTION: The remote connection will be disconnected temporarily after changing the SSL settings.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 97 98

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 48