Maxtor 777 W V1.0 Manual de instrucciones descargar pdf (Pagina 19)

8921ADT Instruction Manual 19

Conﬁguration

The AES 2 output can be set to one of the following output modes:

•C, D (Pass) – the inputs selected for C and D appear at the AES output

unmodiﬁed.

•– C, – D (both phase inverted) – the inputs selected for C and D are both

inverted at the AES output.

•– C, D (C Phase Inverted) – the input selected for the C channel is

inverted while the D channel is non-inverted at the AES output.

•C, – D (D Phase Inverted) – the input selected for the C channel is not

inverted while the D channel is inverted at the AES output.

•C + D, (monaural sum) – the inputs selected for the C and D channels

are reduced in level by 6 dB, summed together, and output on both

channels at the AES output.

•C + D, C–D (MD D/E) – will be a – 6 dB mono sum to C and – 6 dB dif-

ference decode/encode to D.

•– (C + D) (C + D to Both and Phase Invert) – the inputs selected for the

C and D channels are reduced in level by 6 dB, summed together,

inverted, and output on both channels at the AES output.

•1 kHz (Tone) – a 1 kHz tone is put on both channels at the AES output

with a – 20 dBFS level.

• 400 Hz (Tone) – a 400 Hz tone is put on both channels at the AES output

with a – 20 dBFS level.

• Silence – digital silence is put on both channels at the AES output.

•C/D ID – C/D identiﬁcation tone. A 1 kHz continuous tone with a

– 20 dBFS level for 1 second on Ch C followed by a 3 second continuous

tone on the Ch D (keeps repeating).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

Sin comentarios

Maxtor 777 W V1.0 Manual de instrucciones Pagina 19