Maxtor 777 W V1.0 Manual de instrucciones Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 58
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
8921ADT Instruction Manual 13
Installation
To use J11 and J12 as unbalanced audio outputs if a tracking input or output
is not required, jumper J5 to pins 1-2 (AES1) and J6 to pins 1-2 (AES2). Refer
to Figure 1 on page 9 and
Tracking Input/Output
on page 13.
Figure 4. 8921ADT Rear Input/Output Connectors
Tracking Input/Output
A Tracking Input is provided at BNC J11. Connect an RS-232 level auto
tracking signal from a video frame synchronizer (such as an 8900FSS or
8981FS) to this BNC and set jumper J5 (Figure 1 on page 9) to TRK IN
(pins 2-3).
If you need to loop the tracking input signal to another destination, a buff-
ered looping output is available at BNC J12. To make this Tracking Output
available, jumper J6 (Figure 1 on page 9) to pins 2-3 (TRK OUT).
If no input and/or output audio tracking is needed, these BNCs can be
jumpered to provide additional unbalanced AES 1 and AES 2 BNC outputs
as described in
Digital AES Audio Outputs
on page 12.
Reference Loop-through Input
Connect an NTSC/PAL analog color black reference, AES 48 kHz Word
Clock signal, or 48 KHz AES3-id DARS signal to one of the loop-through
reference connectors, J13 or J14. Terminate the unused connector into 75
if the signal is not looped to other equipment.
J2
J1
J3
J5
J7
J9
J2
J4
J6
J8
J10
J11
J13
J12
J14
IN
8204_03
AES 1-1
AES 1-2
AES 1-3
AES 2-1 (Set jumper J2 for BAL or UN outputs
on both AES 1-1 and AES 2-1)
AES 2-2 (Set jumper J3 for BAL or UN output
on both AES 1-2 and AES 2-2)
AES 2-3 (Set jumper J4 for BAL or UN output
on both AES 1-3 and AES 2-3)
Looping
Reference Input
Tracking Input
(J5 set to 2-3)
or
AES 1 Out
(J5 set to 1-2)
Tracking Output
(J6 set to 2-3)
or
AES 2 Out
(J6 set to 1-2)
Audio In 1
Audio In 3
Audio In 2
Audio In 4
+ - G
Strain relief
Secure with
cable tie
+ - G
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

Comentarios a estos manuales

Sin comentarios