Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 86)

Standalone DVR – Jupiter Series

 Detect

Detect interface is shown as in Figure 6-38.

Here includes the following items:

 Channel: Select channel name from the dropdown list.

 Type: There are three types->Motion detection/Video loss/Camera mask.

 Record channel: Here you can select record channel (Multiple choices).

Please make sure you have set “MD” record in encode interface

and “Schedule Record” in manual record interface.

 Period: Here is for you to set record period. Click “Set” button, you can see an

interface is shown as in Figure 6-39. In Figure 6-39, click “Time Setting”

button, you can see an interface is shown as in Figure 6-40.

Here you can set time period.

 Sensitivity: There are six levels. The sixth level has the highest sensitivity.

 Region: If you select motion detection type, you can click this button to set motion

detection zone. The interface is shown as in Figure 6-41. There are 192

zones (16*12). Right click on the mouse you can go to full-screen display

mode. Click “OK” button in Figure 6-41 to save your motion detection

zone setup.

 Alarm output: Here you can select activated external device when alarm occurs.

 Show message: System can alert you on the local screen when alarm occurs.

 Mail: System can send out email to alert you when alarm occurs.

 Tour: Here you can enable tour function when alarm occurs in corresponding

channel. System supports multiple-window tour. Please refers to chapter

5.3.9 Display for tour interval setup.

 PTZ activation: Click “Set” button, you can see an interface is shown as in

Figure 6-42. System can go to corresponding preset when alarm

occurs.

Figure 6-38

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 110 111

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 86