Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 56)

Standalone DVR – Jupiter Series

After all the setups are completed, please click “OK” button, system needs to reboot to get

all the activated modification.

Figure 5-29

Click “Alarm Set” button, the interface is shown as below. See Figure 5-30 (This interface is

just like the abnormity setup).

Please highlight icon “ ” to select the corresponding function.

You can enable one or more alarm setups. The lower limit ranges from 1% to 99%.

Alarm channel number ranges from 1 to 6. Delay value is from 0 to 240 seconds.

Please note when HDD capacity is not full, system only alarms once!

After completing all the setups, please click “OK” button, system goes to the previous menu.

Figure 5-30

5.5.2 Abnormity

Abnormity interface is shown as below. See Figure 5-31.

 Event type: There are several options for you such as disk error, no disk and etc.

 Alarm output: alarm activation output port, among which is controllable 12V output.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 110 111

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 56