Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 42)

Standalone DVR – Jupiter Series

5.3 Setting

In main menu, highlight “SETTING” icon and double click on the mouse. System setting

interface is shown as below. See Figure 5-2.

Figure 5-2

5.3.1 General

General setting includes the following items. See Figure 5-3.

 System time: here is for you to set system time.

 Date format: there are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.

 Date separator: there are three denotations to separate date: dot, beeline and solidus.

 Snapshot: Here you can set image upload interval. (For special series only)

 DST: Here you can set DST time and date. Please enable DST function and then click

“Set” button. You can see an interface is shown as in Figure 5-4. Here you can set start

time and end time by setting corresponding week setup. In Figure 5-4, enable date

button, you can see an interface is shown as in Figure 5-5. Here you can set start time

and end time by setting corresponding date setup.

 Time format: there are two types: 24-hour mode or 12-hour mode.

 Language: English (* Require other languish, please contact your supplier).

 HDD full: When the hard dish is full, there are two options: stop recording or rewrite.

 Pack duration: Here is for you to specify record duration. Default value is 60 minutes.

 DVR No: If you control several DVRs with only one remote controller, you can

give a name to each DVR for your management.

 Video standard: There are two formats: NTSC and PAL.

 Auto logout: Here is for you to set auto logout interval once login user remains inactive

for a specified time. Value ranges from 0 to 60 minutes.

Note:

Since system time is very important, do not modify time casually unless there is a must!

After completing all the setups please click save button, system goes to the previous

menu.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 110 111

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 42