Maxtor 16Channel Stand Alone DVR Manual de usuario Pagina 289

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 358
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 288
277
APN/Dial No.
Here is the important parameter of PPP.
Authorization
It includes PAP,CHAP,NO_AUTH.
Pulse interval
It is to set time to end 3G connection after you close extra
stream monitor. For example, if you input 60 here, system ends
3G connection after you close extra stream monitor 60
seconds.
Important
If the pulse interval is 0, then system does not end 3G connection after
you close the extra stream monitor.
Pulse interval here is for extra stream only. This item is null if you are
using main stream to monitor.
7.8.2.4.2 Mobile
The mobile setup interface is shown as in Figure 7-28.
Here you can activate or turn off the 3G connected phone or mobile phone, or the phone you set
to get alarm message.
Figure 7-28
7.8.2.5 PPPoE
The PPPoE interface is shown as in Figure 7-29.
Input the PPPoE user name and password you get from the IPS (internet service provider) and
enable PPPoE function. Please save current setup and then reboot the device to get the setup
activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN
from the IP address column.
Please note, you need to use previous IP address in the LAN to login the device. Please
go to the IP address item to via the device current device information. You can access the
client-end via this new address.
alarm shop
Vista de pagina 288
1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 357 358

Comentarios a estos manuales

Sin comentarios