
3.3.2 Mini 1U/1U Series
The mini 1U series DVR has one SATA HDD and 1U series DVR has two SATA HDDs.
Please note, when you install the HDD, please put the cable connecting the main board and the
front panel at the proper position, otherwise it may result in device malfunction.
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
3. Place the HDD in accordance with
the four holes in the bottom.
4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the
rear panel and the side panel.
Please put the cable in the
proper positon.
Please reserve proper distance
here; otherwise it may result in
device manlfunction.
Comentarios a estos manuales