Maxtor 16 Channel Digital Video Recorder Guía de usuario descargar pdf (Pagina 40)

4-4. LOG Search

User can see the log list by selecting this item.

Figure 4.4.1. Log list screen

4-5. PTZ operation

To operate the PTZ functions, connect the controller to the RS-485 port on the rear panel. In

the PTZ control setting in the setup menu, user can select or set the protocol type of the

camera which is the same as the one that is installed on the site. If the camera has a

specific camera ID, select the camera ID using Left or Right button.

The PTZ function button is found on the front panel. Once you press the PTZ button, the

screen will appear as in figure 4.3.1. Highlight the item to select and control the cameras by

using the UP and DOWN or LEFT and RIGHT buttons. Please refer to the table 4.4.1. for

description.

Figure 4.5.1. PTZ control screen

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 61 62

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Guía de usuario Pagina 40