Maxtor 16 Channel Digital Video Recorder Guía de usuario descargar pdf (Pagina 38)

SETUP

Launch the SETUP menu.

SEQ

Enable/disable the automatic sequential display in full or quad mode.

The channel display in quad mode is followed the settings in the setup menu.

PLAY/PAUSE

Launch the SEARCH window.

Use to select channel 1to 4 in full screen mode or to change the quad display

in quad display mode by using the LEFT or RIGHT button. And use to select

and highlight a channel to display in full display mode in 9 split display mode.

The channel display in quad display mode is followed the setting in the setup

menu.

SEL

Switch between full screen and current display mode.

ESC

No action

REC

Select for manual recording for all channels.

4-2. SEARCH Window

1. Select the date of the video to begin searching by using the direction buttons to navigate

through the month.

Figure 4.2.1. Search screen - Date

2. Once you have selected the date, press the SEL button to move to the time line search

window.

3. Use the buttons REW

& FF to select a hour time zone on the 24hours

time table. Once you have selected the time zone, press the SEL button to move to the

60 minutes time table and select all or each channel for playing back the recorded video.

4. Once you select the time zone, then move the time line select Bar (Red) to the point you

wish to start playing video by using the LEFT or RIGHT buttons or F/REW

F/ADV

5. Press the SEL button to playback the recorded video.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 61 62

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Guía de usuario Pagina 38