Maxtor 16 Channel Digital Video Recorder Guía de usuario descargar pdf (Pagina 26)

3-4-2. PTZ Setup

To control the PTZ functions of the camera, connect the controller to the RS-485 port.

For speed dome cameras that supports RS-485, connect them directly to the RS-485 port. But if

the camera is controlled with RS-232C, it is needed to use Signal Converter (RS-485 to RS-

232C)

In the PTZ Control setting in the setup menu, user can select or set the protocol type of the

camera which is the same as the one that is installed on the site. If the camera has a specific

camera ID, select the camera ID by using Left or Right button.

Figure 3.4.3. PTZ setup screen

Table 3.4.3. Menu item in PTZ Setup screen

Item Description

CHANNEL

Channel number that the PTZ is connected to

NAME

Protocol type

SPEED

19200, 14400, 9600, 4800, 2400

0-63

3-4-3. SPOT-OUT

Table 3.4.4. Menu item in SPOT-OUT Setup screen

Item Description

SPOT TYPE

Select either FULL or QUAD for spot channel display.

SPOT ON EVENT

Enable/disable spot channel display when event occurred.

SPOT EVENT DWELL

TIME

Set the dwell time for the display of the event activated channel.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 61 62

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Guía de usuario Pagina 26