Maxtor Digital Video Recorder CBC V 0.4 Manual de usuario Pagina 65

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 90
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 64
64
Ernitec EDNS V1000 series user manual
www.ernitec.com
V 2.2.082012
Camera Setup
Analog Camera Select
Dome Protocol
Dome ID
Camera Name
Hidden
Brightness
Contrast
Saturation
Hue
CH01
None
0
CH1
No
0
0
0
0
To configure dome protocol, select a camera first and set the
communications protocol associated with dome camera using
the Direction keys and ENTER.
NOTE: The settings become effective after saving the
changes and exiting from the menu.
4.5.3 RS485 Setup
The DVR controls the domes via RS-485 communication
protocol. The RS-485 parameters in the DVR must be set to the
same parameters set in dome camera.
Users are allowed to change the RS-485 settings of the DVR.
Select <System Setup> in Main menu, then select <RS485
Setup> from the System Setup menu and press ENTER. The
following menu is displayed.
RS485 Setup
Unit ID
Baud Rate
Bits
Stop
Parity
224
9600
8
1
None
The ID number must match the ID address set by the dome. The
Unit ID is in the range of 1 to 255. Note that there cannot be any
two devices on the same bus given the same ID address, or a
conflict may occur.
NOTE: The settings become effective after saving the
changes and exiting from the menu.
Vista de pagina 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 89 90

Comentarios a estos manuales

Sin comentarios