Maxtor CDR-04S Manual de usuario Pagina 13
- Pagina / 34
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
“High”
PIN 4. SWITCH OUT
Connect to VCR trigger recording terminal of multiplexer, in order to synchronize
recording signals. The default mode is falling (Negative) Edge.
PIN 5. ERROR OUT
When HDD errors happen, this pin will send a signal out.
This pin become “Low” when HDD errors happen. The normal operation remains
“High”
PIN 6. REC START
This pin can accept the external trigger signal to activate record mode from
external device. When the external signal turn to “Low”, it will trigger DVR record
mode. When the external signal back to “High”, it will stop recording action.
The default normal operation remains “High”.
PIN 7. EXTERNAL ALARM NC
Under normal operation COM connect with NC and disconnect with NO. But when
alarm triggered, COM disconnect with NC, and connect with NO.
PIN 8. EXTERNAL ALARM NO
Under normal operation COM connect with NC and disconnect with NO. But when
Alarm triggered, COM disconnect with NC, and connect with NO.
PIN 9. GND
GROUND
PIN 10. RS485-B
DVR can be controlled remotely by an external device or control system, such as
a control keyboard, using RS485 serial communications signals.
PIN 11. RS485-A
DVR can be controlled remotely by an external device or control system, such as
a control keyboard, using RS485 serial communications signals.
PIN 12. DISK FULL
When HDD is full, it sends a signal to trigger next DVR record mode, if you install
another DVR. Under normal operation, the signal remains “High”. But when disk
full, DVR will send the “Low” signal.
PIN 13. ALARM RESET
To connect wire from ALARM RESET ( PIN 13 ) to GND ( PIN 9 ) connector, it can
disable ALARM. An external signal to ALARM RESET ( PIN 13 ) can be used to
13
Intelligent Security & Fire
- Digital Video Recorder 1
- 1. Introduction 3
- 1.2 Features 4
- 1.3 Specifications 5
- 2. Installation 6
- 3. Configuration 7
- 3.2 Front panel keypad 9
- HDD HDD FULL TIMER ALARM 10
- 3.4 Menu setup 14
- 3.5 System setup 14
- 3.7 Record mode setup 20
- 3.8 Alarm mode setup 22
- ►Alarm 22
- 3.9 Remote protocol setup 23
- 3.10 Event 25
- 4. Operation 27
- 4.3 Play 29
- 4.4 Search 30
- ►Last Record 30
- ►Full List 30
- 4.5 Video loss 31
- 4.6 Key lock 31
- 5.1 Trouble shouting 32
Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Maxtor CDR-04S
Grabadores de vídeo digital (dvr) Maxtor Built in Digital Video Recorder Manual de usuario
(73 paginas)
(73 paginas)
Grabadores de vídeo digital (dvr) Maxtor Digital Multiplex Recorder Instrucciones de operaciones
(42 paginas)
(42 paginas)
Grabadores de vídeo digital (dvr) Maxtor Digital Video Recorder CBC V 0.4 Guía de usuario
(24 paginas)
(24 paginas)
Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder Manual de usuario
(98 paginas)
(98 paginas)
Grabadores de vídeo digital (dvr) Maxtor 16 Channel Digital Video Recorder Manual de usuario
(86 paginas)
(86 paginas)
(12 paginas)
(22 paginas)Paxton Swipe card 25 kit manuály
Uživatelské manuály a uživatelské příručky pro Pro domov Paxton Swipe card 25 kit.
Poskytujeme 1 manuály pdf Paxton Swipe card 25 kit ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentarios a estos manuales