Maxtor 16 Channel Digital Video Recorder Manual de usuario descargar pdf (Pagina 41)

Digital Video Recorder User Manual

4.5.5 Alarm out

Alarm out includes three sub menus: alarm out, schedule and buzzer

① Alarm out

Step 1: enter into system configurationalarm out; refer to Fig 4-28:

Step 2: in this interface, user can set relay alarm out

name and select hold time which means the interval

time between the two adjacent alarms.

Step 3: user can setup all channels with same

parameters.

② Schedule

Step 1: enter into system configurationschedule;

Step 2: the setup steps of alarm out schedule are

familiar with schedule; user can refer to 4.4.1 Schedule

for details.

Fig 4-28 system configuration-alarm out

Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue.

③ Buzzer

Step1: enter into system configurationbuzzer;

Step2: tick off Buzzer and set buzzer alarm hold time

4.6 Network configuration

Network configuration includes four submenus: network, sub stream, Email and other settings.

4.6.1 Network

Step 1: enter into system configurationnetwork configurationnetwork; refer to Fig4-29:

Step 2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in

IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input that address:

http://192.168.0.25:82

into IE browser.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 133 134

Sin comentarios

Maxtor 16 Channel Digital Video Recorder Manual de usuario Pagina 41