Maxtor QUICKVIEW ATA Manual de usuario descargar pdf (Pagina 46)

SATA Bus Interface and ATA Commands

Maxtor QuickView 400/500GB Serial ATA Hard Disk Drive 5-9

81 Minor version number

0000h or FFFFh = device does not report version.

0001h-FFFEh = see 6.16.41 of ATA/ATAPI-7 specification

Command set supported.

15: Obsolete

14: 1 = NOP command supported

13: 1 = READ BUFFER command supported

12: 1 = WRITE BUFFER command supported

11: Obsolete

10: 1 = Host Protected Area feature set supported

9: 1 = DEVICE RESET command supported

8: 1 = SERVICE interrupt supported

7: 1 = release interrupt supported

6: 1 = look-ahead supported

5: 1 = write cache supported

4: Shall be cleared to zero to indicate that the PACKET Command feature set is

not supported

3: 1 = mandatory Power Management feature set supported

2: 1 = Removable Media feature set supported

1: 1 = Security Mode feature set supported

0: 1 = SMART feature set supported

Command sets supported.

15: Shall be cleared to zero

14: Shall be set to on

13: 1 = FLUSH CACHE EXT command supported

12: 1 = mandatory FLUSH CACHE command supported

11: 1 = Device Configuration Overlay feature set supported

10: 1 = 48-bit Address feature set supported

9: 1 = Automatic Acoustic Management feature set supported

8: 1 = SET MAX security extension supported

Table 5-2 Identify Drive Command Parameters

Word CONTENT DESCRIPTION

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 62 63

Sin comentarios

Maxtor QUICKVIEW ATA Manual de usuario Pagina 46