Maxtor 4Channel Stand-alone DVMR Manual de usuario descargar pdf (Pagina 26)

KGUARD Standalone DVR KG-SHA104/108 User Manual

23 www.kguardsecurity.com

5.2.6. Network Setup

Your DVR supports to be remotely accessed via

network, so that you can remotely control the

DVR for monitoring, recording, playing back or

making backup. Prior to the remote access, you

need to set the network configuration at MAIN

MENU  NETWORK interface.

5.2.6.1. Intranet/LAN Access Setup

If your DVR is connected to a router of your LAN (local area network), then you can setup the

NETWORK Setup section of the DVR to view the image your DVR is recording remotely using

computers connected within your LAN.

Note: Prior to changing the NETWORK Setup of your DVR, it is strongly recommended that you

perform the following tasks:

1. Access the configuration page of your router.

2. Reserve an IP Address in your router that is not used by other computers or devices connected to

your internal network.

3. Write down the assigned IP Address of your DVR, Subnet Mask, IP Address of the router

(Gateway) your DVR connect to for future reference.

A. Select STATIC as the network TYPE.

B. Setup PORT (media port)

C. Input the WEB PORT (Must be different

from media PORT)

D. Enter the IP Address that you have reserved

at the beginning of this section into this field to

be the unique address of your DVR in your local

network.

E. NETMASK: It is recommended to leave the

Subnet mask as the default 255.255.255.0.

F. Set the GATEWAY to the IP Address of your

router.

G. Enter the DNS (Domain Name Server)

Address; set this to you router's IP address.

H. Click “APPLY” to save your change.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 54 55

Sin comentarios

Maxtor 4Channel Stand-alone DVMR Manual de usuario Pagina 26