Maxtor 4Channel Stand-alone DVMR Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
4Ch Real time/Triplex/Mux
- Stand Alone DVR
CHAP. 5 Set up
System Status Messages
(1) If MEMORY STICK is not inserted :
- USB STORAGE IS CHECKING…
- USB STORAGE IS NOT AVAILABLE
- RE-CONNECT THE USB STORAGE
- CONECT THE OTHER USB STORAGE
(2) When MEMORY STICK or USB HDD is recognized
- USB STORAGE IS CHECKING …
- THERE IS A FREE SPACE ON STORAGE
- USB STORAGE IS AVAILABLE
(3) During Back-Up
- CHANGE WRITE PROTECT MODE (Only WRITE PROTECT is caught, it can be seen)
- START WRITING IN USB STORAGE
- FINISH WRITING IN USB STORAGE
(4) Error Message
- THERE IS A PROBLEM ON USB PORT (If USB PORT fails to work properly)
- USB STORAGE IS FULL (When USB is full)
- FILE SYSTEM IS NOT SUPPORTED (If File System is not supported)
- SIZE IS LARGER THAN FREE SIZE (If back-up size is larger than free space)
Back-Up procedure is the same as CDR Back-Up.
If Back-Up size is larger than 2GB, it creates several files. (It saves by 2GB).
5-7. FIRMWARE UPGRADE
You can upgrade your DVR with a firmware by using CD-RW.
Go to FIRMWARE UPGRADE menu and insert a CD containing a firmware.
FIRMWARE UPGRADE
CURRENT VER VER 1.01.03
UPGRADE VER
First, you click CD-CHECK. After finishing CD-CHECK, click UPGRADE. After you see a
message POWER OFF AND POWER ON at the bottom, then turn off and on your DVR unit to
finish upgrading and restart the system.
DVR LOG-IN
USER ID ADMIN
USER PW
FIRMWARE CD CHECK OK
MEMORY ALLOCATE OK
READ CD-R IMAGE OK
CD-R IMAGE CRC 16B1
CURRENT IMAGE CRC 503D
ERASE FLASH SECTOR OK
WRITE FLASH SECTOR OK
UPDATE IMAGE CRC 16B1
NOW POWER OFF AND POWER ON
USER
PW
________
ENTER EXIT
30
NOW
POWER
OFF
AND
POWER
ON
CD-CHECK UPGRADE ESC
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Comentarios a estos manuales

Sin comentarios